User Tools

Site Tools


bent_normal_maps_knald_1.2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
bent_normal_maps_knald_1.2 [2016/10/29 14:03]
adavies
bent_normal_maps_knald_1.2 [2017/05/23 03:49] (current)
Line 15: Line 15:
   * **Uniform Clamped:** The bent normal represents the expectation for the distribution of visible directions.   * **Uniform Clamped:** The bent normal represents the expectation for the distribution of visible directions.
   * **Uniform Unclamped:​** Corresponds to projection of visibility onto second spherical harmonic band L=1.   * **Uniform Unclamped:​** Corresponds to projection of visibility onto second spherical harmonic band L=1.
 +
 +[{{https://​s3.amazonaws.com/​docs.knaldtech.com/​docuwiki/​buck_head_magnitude_cosine_clamped_unclamped.jpg?​nolink&​1150|The difference between the three weighting methods for Magnitude within Knald. Cosine (left), Uniform Clamped (middle) & Uniform Unclamped (right).}}]
  
 **Flip Green:** Here you can change the axis in the dropdown to match the Normal/​Derivative maps for your engine or application as required. By default Knald is set to X+Y+Z+, so if you are using a Normal or Derivative map that differs from this configuration,​ you will need to change this setting. To change this setting check the Flip Green check box to save your choice. ​ **Flip Green:** Here you can change the axis in the dropdown to match the Normal/​Derivative maps for your engine or application as required. By default Knald is set to X+Y+Z+, so if you are using a Normal or Derivative map that differs from this configuration,​ you will need to change this setting. To change this setting check the Flip Green check box to save your choice. ​
bent_normal_maps_knald_1.2.1477749834.txt.gz ยท Last modified: 2017/05/23 03:49 (external edit)